Glass Partitioning

Glass Office Partitioning Solutions


Frameless single glazed partition with glass door and aluminium frame

The table below gives indicative pricing for a straight run of single glazed frameless glass partitioning similar in style to the images shown. All sizes can be offered and a firm quotation would be supplied after a site survey. An estimate can be supplied if dimensional drawings are supplied.

Step One

Choose height and length of partition required

Length 2.4m Height 2.7m Height
2.5m £925.00 £1,097.00
3.0m £987.00 £1,197.00
3.5m £1,152.00 £1,397.00
4.0m £1,316.00 £1,596.00
5.0m £1,645.00 £1,995.00
10.0m £2,960.00 £3,600.00
15.0m £4,275.00 £5,190.00
20.0m £5,475.00 £6,660.00


Step Two

Choose a full height glass door, if required

Add 2.4m Height 2.7m Height
Single Door £850.00 £920.00

Where there is no door frame required there will be a small gap between the glass door and adjacent panel to avoid glass hitting glass – this is the standard detail.

If a door frame is included then this avoids the gap and improves the acoustic performance of the partition.

Add 2.4m Height 2.7m Height
Single Door inc Alu Frame £1,150 £1,250.00


Doors include stainless steel pull handles only. Standard hinge detail is pivot top and bottom patch with floor spring. Locks and other ironmongery would be priced after the survey in order to fully ascertain your requirements.Please contact us if advice is needed. Full details of the door arrangement would be supplied prior to installation.

Step Three

Contact us

You will now have a guide price to the cost of the glass partition installation fully supplied and installed.

If you need to discuss your project further, forward drawings to us, or to arrange for a site survey then please contact us and we shall be pleased to assist.

Email: [email protected]

Telephone: 02476 468710

Recent Projects:


We operate nationally but a surcharge may apply for isolated locations.

Installation at Ground Floor and First Floor level is included, other floors will be priced separately.

Standard 2 rows of dot film manifestation are included to conform to DDA ( Disability Discrimination Act) Regulations. For other film options please enquire.

The standard aluminium framework will be a choice of RAL 9006 silver or RAL 9010 white. Other options can be quoted, if required

Good access and parking is assumed.

Other Services

For further details relating to glass partitioning and previous installations please visit:

For a complete commercial interior fit out service please visit: